|
Tube Fittings - Poly Type Tube Fitting
|
X
Flareless Poly-Type Fittings offer a minimum of installation time. To
assemble the New Poly-Type Fitting, just push tubing into fitting &
tighten the nut. There is no need to disassemble - no fumbling for
a loose sleeve. This new fitting has a plastic sleeve which snaps into
the nut. The complete unit-body, nut & sleeve is furnished assembled,
ready for installation. When used with Poly-Type, PVC or EVA
Tubing, fitting is assembled finger tight.
- No tools needed for installation
- Excellent holding power - no tubing twist
- A universal fitting: Poly-Type fittings are used with plastic or soft metal tubing for pneumatic instrumentation circuits & applications with other gases & liquids
- Furnished: A three piece tube fitting, assembled with nuts & sleeves
- Materials: Elbows & Tees - Brass Forgings, Connectors, Unions, Nuts: S.A.E. CA360 or equal, Plastic Sleeves - Acetal copolymer (Celcon), Pipe threads - Long length Dryseal American (National) Standard Taper pipe threads
| P/N | STYLE | TUBE O.D. | PIPE THREAD | |
Order |
259P | Brass Nut & Poly Sleeve Assy | 1/8" - 1/2" | 1/16" - 3/8", 10-32 |
Order |
261P | Brass Nut & Plastic Sleeve Assy | 1/8" - 1/2" | 1/16" - 3/8", 10-32 |
Order |
262P | Poly Seal to Poly Seal Union | 1/8" - 1/2" | 1/16" - 3/8", 10-32 |
Order |
264P | Union Tee | 1/8" - 1/2" | 1/16" - 3/8", 10-32 |
Order |
266P | Female Connector | 1/8" - 1/2" | 1/16" - 3/8", 10-32 |
Order |
268P | Male Connector | 1/8" - 1/2" | 1/16" - 3/8", 10-32 |
Order |
269P | Male Elbow | 1/8" - 1/2" | 1/16" - 3/8", 10-32 |
Order |
270P | Female Elbow | 1/8" - 1/2" | 1/16" - 3/8", 10-32 |
Order |
271P | Male Run Tee | 1/8" - 1/2" | 1/16" - 3/8", 10-32 |
Order |
272P | Male Branch Tee | 1/8" - 1/2" | 1/16" - 3/8", 10-32 |
 264P04 |
 261P04 |
 269P04X02 |
