| |
3000U Serializer
|
|
| |
The Model 3000U altitude serializer connects to the existing mode
C encoder in the aircraft. It converts the graycode into a decimal
format and sends it to the GPS receiver using a serial connection.
It will function with Trimble, Garmin 150, Northstar, and Apollo
GPS receivers.
 | Northstar has tested and approved the 3000U for use with its GPS receivers |
| Garmin has tested and approved the 3000U for use with its approach approved GPS receivers |
| Trimble navigation has tested and approved the model 3000U for use with its GPS aviation receivers |
| II Morrow has tested and approved the model 3000U for use with all of its GPS aviation receivers |
Note: Please contact ICARUS if transponder is a Narco AT-50 or 50A
or a Wilcox 1014
P/N 3000U
|
|
| |
| Model |
3000U Serializer |
| Specifications |
 |
| Weight |
5 oz. |
 |
| Operating Temperature |
-20°C to +55°C |
|
| Power Requirements |
10 to 30VDC @ 20 mA (must be fused) |
|
| Mount |
Any orientation: uses four screws |
|
| Converts Altitude |
-1200° to 62,000' |
|
| Impedance |
< 100K input on all code lines |
|
| Baud Rate |
9600/2400/1200 baud one reading per second |
|
| Data Format |
RS-422 balanced ouput & TTL output suitable for RS-232 |
|
| Protocols |
Trimble, Northstar, Garmin, & Apollo GPS receivers |
|
| PIN Configuration |
P1 on unit DB15M; P2 on unit DB15M; P3 on unit DB9M |
|
| Size |
4.2" x 3.00" x 1.00" |
|
Print this Page
|
