Print Page
TT1000A Turbine Temperature Test Set
(DAI Part# TT1000A)
The TT1000A is a completely self-contained,
battery powered, aircraft turbine temperature
system tester capable of measuring system lead
resistance, insulation, and performing indicator
run-outs with a range up to1000 °C. The unit was
specifically designed to meet all requirements for
testing aircraft Chromel/Alumel (CH/AL) turbine
temperature measuring systems and provides
an accurate display of thermocouple outputs in
degrees Celsius (°C). The TT1000A is engineered
for maximum ease of operation and includes
an automatic digital display that practically
eliminates human error and reduces testing
time to a minimum. The test leads incorporate
automatic temperature compensation to remove
induced voltage caused by a "Cold Junction"
created when the test leads are attached to the
aircraft. All of the features designed into the
TT1000A have been added to reduce maintenance
time and cost as well as provide a maintenance
friendly tester for measuring and displaying
resistance of thermocouple, thermocouple
rings and system lead circuits. Simulates CH/AL
thermocouple with or without simulated system
lead resistance. Simulates thermocouple outputs
and system lead resistances from 0 to 25 ohms.
Measures and displays insulation resistance of
system wiring and other components. Measures
and displays values of CH/AL thermocouple in
terms of degrees Celsius (°C) temperature.
Similar Items |
TT1000AU - BARFIELD TT1000A USED
|
TT1200A - BARFIELD DIGITAL TURBINE TEMP TEST SET 101-00930
|
|
|
FEATURES DIMENSIONS ACCESSORIES |
| Automatically compensates for ambient temperature at test lead connection junction point or indicates cold junction temperature |
| Thermocouple and lead resistance measurements to 0.01 ohm and insulation measurements up to two (2) megohms |
| Large, 9mm (0.35") high character, 3 1/2-digit liquid crystal display with pre-programmed legends |
| Range: from 0 to 1000° C certified, -60 to 1160° C extended |
| Measures and displays values of CH/AL thermocouple in terms of degrees Celsius (°C) temperature |
| Simulates CH/AL thermocouple with or without simulated system lead resistance |
| Accuracy: Typical measurement error at ambient (25°C) less than ± 1°C |
|
Height | 5.0 | 12.7 |
Width | 8.0 | 20.3 |
Depth | 5.5 | 14.0 |
Weight | 4.0 | 1.8 |
|
MOD B: Millivoltage doubler. For use on 16-ohm systems.
102-00902 Specially modified TT1000, adapter cable and carrying case for testing GE CF6-80 A, A1 and C2 engines.
102-00903 Specially modified TT1000, adapter cable and carrying case for testing GE CF6-6 and CF6-50 engines.
|
|
|
|
|