Serving the Aviation Industry since 1973
ISO 9001:2015 and AS9100D Certified
Print Page
ELT 1000
406 MHz ELT with GPS Nav Interface
Base Pack with 110-338 Rod Antenna and remote switch
(DAI Part# 8204)
Improved Postional Accuracy
The ARTEX ELT 1000 is a value-priced upgrade to standard 121.5 MHz transmitters, which are no longer monitored by the Cospas-Sarsat system. The 406 MHz transmitter produces a much more accurate position, typically 1.86 miles as compared with 9.3 to 12.4 miles for 121.5 MHz transmitters. When coupled to the aircraft navigation system via the built-in GPS interface, the ELT 1000's accuracy improves up to approximately 110 yards.

An Affordable Upgrade
Because it is a single output ELT, the ARTEX ELT 1000 utilizes the same RF output and only one coax cable to transmit a 406 MHz emergency signal to Cospas-Sarsat satellites and a local 121.5 homing signal. The all new built in GPS Nav Interface does not require aircraft power to operate - greatly reducing installation cost. The new remote switch only requires 2-wires, this makes upgrading your older 121.5 MHz ELT simple and affordable.

Similar Items
click image to zoom

More Documents...
Operating Frequencies
121.5 MHz +/-5KHz 406.0 to 406.1 MHz, Depending on Cospas-Sarsat TAC
Output Power
406 MHz: 5W for 24 hours @-20°C to +55°C (-4°F - 131°F)
121.5 MHz: 100 mW min >50 hours @ -20C to +55C (-4°F - 131°F)
Output Connector
BNC Female
Automatic by 4.5 ft/sec (2.3 G)
Primary G-Switch and Manual Activation
6-year Lithium LiSO2
Temperature Certified to:
Operating: -20°C to +55°C (-4°F - 131°F)
Storage: -55°C to +85°C (-67°F - 185°F)
Self Test
G-Switch Enabled
406 MHz Power
Antenna/Coax Connection
Low Battery
Remote Control
Mounting Hardware
ELT 1000 Mounting Tray: 8304
Other Parts
Coax Cable
Audio Buzzer (alerts ground crews of accidental
Remote Switch
ACE Adapter Module (Optional for ACK retrofit)
Weights (with tray)
Total Weight: 2.2 lbs (996 g)
ELT Transmitter with mounting hardware installed:
6.59" (167 mm)L x 2.86" (73 mm)H x 3.69" (94 mm)W