Aero 452-201-011 Remote Mounted CO Detector
(DAI Part# 452-201-011)
This FAA Certified CO detector unit can be remote-mounted anywhere inside the cabin.
Aero 452 Remote is TSO certified and STC approved for installation !
Aero 452 R is the first TSO certified remote-mountable Carbon Monoxide detector for use in General Aviation. This unit is a derivative of Aero 452 (Panel Mount). This unit comes standard with remote re-set switch and can be installed behind a panel.
This unit is pre-wired for connecting to an external annunciator warning lamp on your panel. Different light models can be purchased separately.
Input Power 14V or 28V DC
Power Usage Less than .25 Watts
Temp Range -20 °C to 55 °C
Inspection Each Unit 100 % tested.
Humidity 5 % to 95 % RH (non-condensating)
Circuit Breaker 2 Amp
Design Meets TSO-C48A
Weight 3.5 Oz
Sensor Tested to 25,000 Ft
Panel Warning light / Annunciator
Alarm Between 50-70 PPM in less than 5 minutes.
RS-232 Output: Garmin G900X G1000 GNS480 Electronic Instrument EI-MVP50 Advance Flight Systems. Model AF-2500/AF-3500 Grand Rapids Sports Series Monitor Blue Mountain Avionics Aerosonic/OPT Technology Flight OP.
The CO sensors in our detectors have a 5 to 7 year life under ideal conditions. Even if they are protected from all external
contaminants, we strongly recommend re-calibration of the units after 5 years. The CO sensor is extremely sensitive and certain
substances in the ambient air may change its characteristics and affect reliability.
We will re-calibrate any of your CO Guardian models for a flat fee ( Please contact CO Guardian for pricing information). This
service includes the installation of a new CO sensor, re-calibration of the unit and a complete system check. In addition, you will
receive a fresh 12 month warranty.
