Carbon Monoxide detection |
Detects CO from as low as 10 PPM. Display level from 10 PPM to 999 PPM. Unit will alarm if CO level exceeds 50-70 PPM for more than 5 minutes. Instant alarm if level exceeds 150 PPM. Is designed to meet FAR 23.831 |
Clock function |
Shows Local Time and Zulu Time in a 24 hour format. |
Flight Timer |
Flight Timer starts automatically on Take off when 150 ft above runway level. It can also be started manually. |
Stop Watch |
Stop watch function lets you time any segment of your flight. |
Inside / Outside Air Temp |
Keeps track of inside and outside air temperature in both Fahrenheit and Celsius. |
Battery Voltage |
You get instant alert when battery voltage drops / rises above pre-set levels for 14 / 28 V systems. |
Cabin Altitude |
Monitors cabin altitude and sounds an alert when you climb above 10,000 ft , 12,500 ft, and above 14,000 ft. This alerts the pilot to turn on the oxygen as may be required. |
Density Altitude |
The density altitude is indicated based on the absolute pressure and OAT. |
RS 232 output |
Interfaces with CNX 80 (software level 2.0 required) where you will get relevant indications/ alerts. |
Remote light |
Remote light can be mounted for CO alert and Altitude alert. |