Searching for Guardian Avionics
6 Web Page(s) Found
|
 | 353-101 - Guardian Avionics Aero 353-101 CO Detector
DAI Part# 353-101
Aero 353 now has a state-of-the art CO sensor that immediately reacts to the presence of CO. It was designed for pilots who want the unit to be small so it takes up a minimum of panel space, yet gives peace of mind. Detector will go into alarm within five minutes if CO levels are greater than 50 PPM. The unit has dual light LED alarm; Amber less than 99 PPM and Red 100 PPM and above). Very s... |
|
 | 452-101-011 - Guardian Avionics CO Detector Panel Mounted
DAI Part# 452-101-011
AERO 452 is the first TSO certified Carbon Monoxide detector for use in General Aviation. The 452 can be easily installed in approximate 2-4 hours as log book entry or as a follow on installation from a sample STC on a Cessna 172 supplied in our downloads section. Aero 452 is the first TSO-certified carbon monoxide detector for use in general aviation. Our unit has passed all mandatory functiona... |
|
 | 452-201-011 - Guardian Avionics CO Detector Remote Mounted
DAI Part# 452-201-011
This FAA Certified CO detector unit can be remote-mounted anywhere inside the cabin. Aero 452 Remote is TSO certified and STC approved for installation ! Aero 452 R is the first TSO certified remote-mountable Carbon Monoxide detector for use in General Aviation. This unit is a derivative of Aero 452 (Panel Mount). This unit comes standard with remote re-set switch and can be installed behind a... |
|
 | 551-101-002 - Guardian Avionics CO Detector with Display Only
DAI Part# 551-101-002
Aero 551 is designed to fit a standard 2 1/4 panel hole. This unit is our most sophisticated CO detector; it produces an extremely fast response when carbon monoxide is present. The CO display page in the Aero 551 shows the CO level in PPM ( Parts per million ). The Aero-551 can display CO from 10 PPM to 999 PPM. (For any level above 999 PPM, the display will register only 999). The alarm will s... |
|
 | 553-101-001 - Guardian Avionics with Clock features
DAI Part# 553-101-001
CO Guardian has just launched a new multi-function Carbon Monoxide Detector, Model Aero-553-101-001. Though the primary function of the unit is to monitor CO levels from as low as 10 ppm, there is a whole lot more to this new instrument. This latest CO detector from the CO Guardian family, with pleasing aesthetics and an easy to read LCD display, has been designed to replace a standard 2-1/4" i... |
|
 | 553-500 - Guardian Avionics 551/553 OAT Probe
DAI Part# 553-500
This OAT probe is required to read outside air temperature (OAT). Though Aero 553-500 works fine without this, the OAT temperature display will show *** for outside temperature. We use a standard OAT probe found in General Aviation 0-5 Volt. If you already have a probe, you should be able to use it, but the two cannot be shared because this is a serial resistance type circuit. Each OAT gauge must ... |
|
|
|
|
| |
