Searching for Thales Aerospace Communications
123 Web Page(s) Found
View News
| CI 1085-20-L - Comant CI 1085-20-L Dual Port Multi-Function UHF/VHF ADS-B Antenna DAI Part# CI1085-20-L Our sleek new VHF/UHF is a whole lot more than meets the eye. This single antenna in one radome holds no less than 5 different TSO's from the FAA. The CI 1085 uses a popular footprint that contains ATCRBS Mode S Transponder/DME//UAT ADS-B and VHF communications. No one has done this before. On today's crowded airframes we expect this design will be a welcome relief to installers everywhere. ... |
|
| 24-37-01 - Comant 24-37-01 VOR/GS Blade set DAI Part# 24-37-01 Frequency 108 to 118 MHz (VOR) 329 to 336 MHz (glide slope) VSWR 5.0:1 max RF Power Rating 50 watts Impedance 50 ohms nominal Grounding Provision Through mounting Temperature Range -55C to +71C Mating Connection BNC series Mil Type UG 88/U Shell Construction Polyester resin and fiberglass filled with polyurethane foam Finish Wh... |
|
| CI 101 - Comant CI 101 Transponder DAI Part# CI101 Transponder antenna with top loaded stub monopole. Antenna radiator is mechanically captivated and is machined from solid brass for impact resistance. Contact points are made from beryllium copper. Metallic parts are plated with bright nickel for corrosion protection. Mounts through a single 0.600" diameter mounting hole. Applications Single and twin engine piston aircraft for applications of ... |
|
| CI 102 - Comant CI 102 Marker Beacon Antenna DAI Part# CI102 Designed for use with modern, high sensitivity marker beacon receivers. Small and lightweight, featuring 4-hole internal mounting for simple installation. Antenna assembly is enclosed in an injection molded radome which is impervious to the tough environments typical of the underside of an aircraft. Skydrol and rain erosion resistant. DC grounded to minimize accumulation of precipitation static. |
|
| CI 105-16 - Comant CI 105-16 DME/Transponder Antenna DAI Part# CI105-16 Broadband and rugged antenna designed for DME or transponder use. The CI 105-16 was designed specifically for the Honeywell Bendix-King KA60. This unit offers the extended length, two stud mounting found on the KA60. Tested to the tougher DO-160D environmental requirements, this antenna offers the best in ruggedness and performance. |
|
| CI 105-17L - Comant CI 105-17L Single Port ADS-B for UAT and 1090ES DAI Part# CI105-17L CI 105-17-L ADS-B / TIS-B / UAT Antenna Ideal for upcoming ADS-B FAA mandate, this is the only antenna of its kind, capable of both IN and OUT processing. Single connector blade antenna that can be used for ADS-B, TIS-B, UAT, DME or ATCRBS Transponder, plus Mode S. Unlike competitive models, the CI 105-17-L utilizes standard 6-hole mounting pattern. |
|
| CI 105-3 - Comant CI 105-3 DME/Transponder Antenna DAI Part# CI105-3 Identical to the CI 105 in operating characteristics. Antenna configuration specifically designed for external applications using a three hole flange mounting. Includes a BNC connector. |
|
| CI 105-6 - Comant CI 105-6 DME/Transponder Antenna DAI Part# CI105-6 Both are similar in electrical performance to Comant's CI 105, except they provide the popular 4-hole external mounting typical on some turbo-prop and jet aircraft. | CI 105-7 - Comant CI 105-7 DME/Transponder Antenna DAI Part# CI105-7 |
|
| CI 105-9 - Comant CI 105-9 DME/Transponder Antenna DAI Part# CI105-9 Broadband and rugged antenna designed for DME or transponder use. Antenna assembly encased in a glass reinforced polyester molded shell. CI 105-9 comes standard with a 6" extension coax cable and BNC connector. This model offers standard two stud mounting, where the studs are extended to 1" in length. |
|
| CI 105 - Comant CI 105 DME/Transponder Antenna DAI Part# CI105 Broadband and rugged antenna designed for DME or transponder use. Antenna assembly encased in a glass reinforced polyester molded shell. Standard two stud mounting configuration. CI 105 includes a BNC connector. |
|
| CI 106 - Comant CI 106 UHF Radiotelephone Antenna DAI Part# CI106 Stub antenna designed to withstand the environment associated with the underside of an aircraft. Antenna radiator is mechanically captivated and sealed against leakage. All exposed metal surfaces are nickel-plated for corrosion resistance and long service. See Order Options for connector choices. |
|
| CI 108-1 - Comant CI 108-1 VHF Antenna DAI Part# CI108-1 Designed for world-wide service where VHF communication is available over a wider band. Suitable for either top or bottom mounting. Solid Polyurethane construction for strength, reliability and durability. White Polyurethane finish is Skydrol and rain erosion resistant. The 108 Series has been re-tested and upgraded to the RTCA DO-160D environmental requirements. Optional leading edge protection a... | CI 108 - Comant CI 108 VHF Antenna DAI Part# CI108 Designed for high-performance aircraft applications. Suitable for either top or bottom mounting. Solid Polyurethane construction for strength, reliability and durability. White Polyurethane finish is Skydrol and rain erosion resistant. The 108 Series has been re-tested and upgraded to the RTCA DO-160D environmental requirements and offers the 118 to 137 MHz frequency associated with DO-186A MOPS. ... |
|
| CI 109 - Comant CI 109 VHF Antenna DAI Part# CI109 Exhibits excellent electrical characteristics and incorporates an aerodynamically shaped mounting base and radiator housing that matches the styling of the communication antennas used on the 1968-72 single engine Cessnas. The 109 has been re-tested and upgraded to the new RTCA DO-160D environmental requirements and offers the 118 to 137 MHz frequency associated with DO-186A MOPS. |
|
| CI 110-40-30 - Comant CI 110-40-30 DME/Transponder Antenna DAI Part# CI110-40-30 All metal, low profile antenna is designed for business jet and commercial high speed aircraft. With a popular four hole mount and connector with open path to ground, this antenna is ideally suited for those aircraft equipped with standard transponders and Mode S transponders. Tough, one piece construction provides 175 lbs. side load capability, guarding against breakage from ground equipment. Moi... | CI 110-41-30 - Comant CI 110-41-30 DME/Transponder Antenna DAI Part# CI110-41-30 All metal, low profile antenna is designed for business jet and commercial high speed aircraft. With a popular four hole mount and connector path to ground, this antenna is ideally suited for those aircraft equipped with Mode S transponders. In addition to standard DME, transponder, and Mode S transponder, this antenna can be used for TAS/IHAS installations. Tough, one piece construction provides ... |
|
| CI 110-60-30 - Comant CI 110-60-30 DME/Transponder Antenna DAI Part# CI110-60-30 All metal, low profile antenna is designed for business jet and commercial high speed aircraft. With a popular six hole mount and connector with open path to ground, this antenna is ideally suited for those aircraft equipped with standard transponders and Mode S transponders. Tough, one piece construction provides 175 lbs. side load capability, guarding against breakage from ground equipment. Mois... | CI 110-61-30 - Comant CI 110-61-30 DME/Transponder Antenna DAI Part# CI110-61-30 All metal, low profile antenna is designed for business jet and commercial high speed aircraft. With a popular six hole mount and connector path to ground, this antenna is ideally suited for those aircraft equipped with Mode S transponders. In addition to standard DME, transponder, and Mode S transponder, this antenna can be used for TAS/IHAS installations. Though, one piece construction provides ... |
|
| CI 1114 - Comant CI 1114 Coupler VOR/Three Way DAI Part# CI1114 Coupler provides for use of three VOR receivers from one VOR antenna. Coupler circuitry is housed in stamped enclosure to ensure high reliability. |
|
| CI 1120-300 - Comant CI 1120-300 Triplexer DAI Part# CI1120-300 Comant's CI 1120-300 Triplexer is specifically designed to operate with CI 295-300 Single Connector SAR Antenna. This allows for coverage of 136-174, 380-520 and 764-870 MHz in one antenna with a single-port connection. Tested to extreme MIL-STD-810G environments including UH 60 Blackhawk vibration and an extremely high +125 degrees Centigrade temperatures, the device uses surface mount compone... |
|
| CI 1120 - Comant CI 1120 Diplexer Single VOR/Single GS DAI Part# CI1120 Provides operation between a single VOR receiver and a single glide slope receiver from the same VOR/glide slope antenna. Offers polarized VOR and GS output connectors. For military applications. |
|
| CI 1125 - Comant CI 1125 Diplexer Dual VOR/Dual GS DAI Part# CI1125 Dual VOR/dual glide slope diplexer features diplexer circuitry in a small die-stamped housing for high reliability. Provides operation between two VOR receivers and two glide slope receivers from the same VOR/glide slope antenna. |
|
| CI 118-1 - Comant CI 118-1 Marker Beacon Antenna DAI Part# CI118-1 Low-drag, lower profile alternative to the popular CI 102 "boat style" marker beacon antenna. Approved for medium to high performance single, turbo-prop or jet aircraft and provides simple external mounting. Skydrol and rain erosion resistant. DC grounded to minimize accumulation of precipitation static. |
|
| CI 118-10 - Comant CI 118-10 Marker Beacon Antenna DAI Part# CI118-10 Identical to CI 118 except the mounting base includes a flange to provide for 4-hole external mounting. Approved for medium to high-performance single, turbo-prop or jet aircraft and provides simple external mounting. Skydrol and rain erosion resistant. DC grounded to minimize accumulation of precipitation static. |
|
| CI 118-9 - Comant CI 118-9 Marker Beacon Antenna DAI Part# CI118-9 Identical to CI 118 except the mounting configuration allows for a "drop-in" replacement to the Honeywell Bendix-King KA26 Marker Beacon. This Comant design has been tested to the tough DO-160D environmental standards. Skydrol and rain erosion resistant. DC grounded to minimize accumulation of precipitation static. |
|
| CI 118 - Comant CI 118 Marker Beacon Antenna DAI Part# CI118 Designed specifically for high-performance aircraft applications. Features aerodynamic design in a lightweight package. Antenna is a low profile blade-type encased in a molded polyurethane shell. Skydrol and rain erosion resistant. |
|
| CI 119 - Comant CI 119 VHF Antenna DAI Part# CI119 Designed for large single or twin-engine aircraft. The antenna assembly enclosed in an aerodynamically shaped, injection molded polyester glass shell with internal components foamed in place for mechanical integrity. Reduced height convenient for mounting to the underside of an aircraft. The 119 has been re-tested and upgraded to the new RTCA DO-160D environmental requirements and offers the 118 t... |
|
| CI 120-1 - Comant CI 120-1 VOR/LOC/GS Navigation Antenna DAI Part# CI120-1 VOR/LOC/GS navigation antenna 108-118 MHz (VOR/LOC) 329-335 MHz (GS) Provides optimum VOR performance when used for area navigation Qualified for use on single engine, twin, jet and helicopter aircraft Provides glideslope reception capability Complete set included a pair (2) of blades, each with single BNC connector output, two coax interconnect cables Signal combiner with single BNC co... |
|
| CI 120-200G/S - Comant CI 120-200G/S VOR/LOC/GS Antenna DAI Part# CI120-200G/S VOR/GS navigation antenna set provides optimum VOR performance when used for area navigation. Antenna system qualified for use on single, twin, jet and helicopter aircraft. Also provides glide slope reception capability. Complete set includes a pair (2) of blades, each with single BNC connector output, and two coax interconnect cables. Dual BNC output combiner, providing for a separate RF cable ru... |
|
| CI 120-3 - Comant CI 120-3 Power Combiner VOR/GS DAI Part# CI120-3 Two input--one output Power Combiner is standard equipment with Comant's CI 120G/S and CI 135-300. As the CI 135-300 typical configuration requires two CI 120-3 Power Combiners, the CI 120G/S only requires one. |
|
| CI 120-4 - Comant CI 120-4 Power Combiner VOR/GS DAI Part# CI120-4 Two input--two output Power Combiner is standard for either antenna system. The CI 120-4 provides for two separate cable runs to the avionics installation for NAV 1 and NAV 2 receivers. |
|
| CI 120-400 - Comant CI 120-400 VOR/LOC/GS Antenna DAI Part# CI120-400 Comant designed this VOR/GS navigation antenna blade set for the Cessna 182 Series. Unique design and manufacturing techniques keep this set competitively priced while offering the reduced-drag advantages of a blade set. Provides for VOR/LOC/GS. Complete set includes a pair (2) of blades, each with single BNC connector output, and two coax interconnect cables. Single BNC output phasing combiner ... |
|
| CI 120-5 - Comant CI 120-5 Power Combiner VOR/GS DAI Part# CI120-5 Two input--two output Power Combiner is standard equipment with Comant's CI 120-200G/S-L as supplied to Cessna. The CI 120-5 provides for two separate cable runs to the avionics installation for NAV 1 andNAV 2 receivers. |
|
| CI 120G/S - Comant CI 120G/S VOR/LOC/GS Antenna DAI Part# CI120G/S VOR/GS navigation antenna set provides optimum VOR performance when used for area navigation. Antenna system qualified for use on single, twin, jet and helicopter aircraft. Also provides glide slope reception capability. Complete set includes a pair (2) of blades, each with single BNC connector output, two coax interconnect cables and a signal combiner with single BNC connector output providing fo... |
|
| CI 121 - Comant CI 121 VHF Antenna DAI Part# CI121 Similar to the CI 109, the CI 121 is smaller in diameter and lighter at only 0.5 pounds. Features a tapered glass laminate housing and die-cast aluminum base. Offers standard mounting and appearance to many Cessna communication antennas. The CI 121 has been re-tested and upgraded to the new RTCA DO-160D environmental requirements and offers the 118 to 137 MHz frequency associated with DO-186A MOPS... |
|
| CI 122 - Comant CI 122 VHF Antenna DAI Part# CI122 Designed specifically for mounting to the underside of an aircraft providing excellent radiation coverage for air-to-ground communications. Bent configuration makes it ideally suited for helicopters and low wing aircraft. The CI 122 has been re-tested and upgraded to the new RTCA DO-160D environmental requirements and offers the 118 to 137 MHz frequency associated with DO-186A MOPS. |
|
| CI 138 - Comant CI 138 VHF Antenna DAI Part# CI138 Identical to the CI 119 with the exception of the mounting hole pattern and RF connector location which are compatible with Beechcraft mounting. RF connector is offset from the center line of the antenna. The CI 138 has been re-tested and upgraded to the new RTCA DO-160D environmental requirements and offers the 118 to 137 MHz frequency associated with DO-186A MOPS. |
|
| CI 139 - Comant CI 139 VHF Antenna DAI Part# CI139 Piper compatible mounting version of the CI 119 with respect to the mounting hole pattern and RF connector location. The CI 139 has been re-tested and upgraded to the new RTCA DO-160D environmental requirements and offers the 118 to 137 MHz frequency associated with DO-186A MOPS. |
|
| CI 150-250-L - Comant CI 150-250-L WiFi Datalink Antenna DAI Part# CI150-250-L The Comant CI 150-250-L is intended for Wi Fi applications using 11.802 data protocol. Applications include the ability to receive wireless intranet and data transfer while the aircraft is parked on the ramp. |
|
| CI 157P - Comant CI 157P VOR/GS Antenna DAI Part# CI157P "V" Dipole VOR/Glide Slope Antenna with fixed elements designed specifically for compatibility with the Piper Aircraft mounting. Integral ferrite balun provides for higher radiation efficiency replacing cumbersome coaxial baluns previously utilized. Radiating elements are not removable. Not approved for helicopter installations. |
|
| CI 158C-2 - Comant CI 158C-2 VOR/GS Antenna DAI Part# CI158C-2 "V" Dipole VOR/Glide Slope Antenna with detachable elements mounts on top of the vertical fin stabilizer offering the four-hole mounting configuration found on many Beech aircraft. RF design similar to the CI 157P. Integral ferrite balun provides for higher radiation efficiency. Detachable element results in a significantly smaller shipping and storage carton than fixed element versions. Not appro... | CI 158C - Comant CI 158C VOR/LOC/GS Antenna DAI Part# CI158C "V" Dipole VOR/Glide Slope Antenna with detachable elements mounts on top of the vertical fin stabilizer for most single engine general aviation aircraft. RF design similar to the CI 157P. Integral ferrite balun provides for higher radiation efficiency. Detachable element results in a significantly smaller shipping and storage carton than fixed element versions. Not approved for helicopter install... | CI 159C - Comant CI 159C VOR/GS Antenna DAI Part# CI159C "V" Dipole VOR/Glide Slope Antenna with detachable elements is similar to the CI 158C-3 with the exception of offering 2-hole mount instead of a 4-hole mount. This V Dipole encompasses reduced static capability with the use of P-Stat paint. Integral ferrite balun provides for higher radiation efficiency. Not approved for helicopter installations. |
|
| CI 164 - Comant CI 164 Marker Beacon Antenna DAI Part# CI164 Lightweight flush mount antenna was originally designed for use on military aircraft. Provides for dual marker beacon signal outputs at the antenna, eliminating the need for a separate marker beacon splitter. Antenna is housed in an aluminum enclosure with a glass laminate cover. Internal components are potted in place for mechanical integrity. The CI 164 is designed for curved "crown" surface mou... |
|
| CI 165 - Comant CI 165 Marker Beacon Antenna DAI Part# CI165 Lightweight flush mount antenna was originally designed for use on military aircraft. Provides for dual marker beacon signal outputs at the antenna, eliminating the need for a separate marker beacon splitter. Antenna is housed in an aluminum enclosure with a glass laminate cover. Internal components are potted in place for mechanical integrity. The CI 165 is designed for flat surface mounting and ... |
|
| CI 175 - Comant CI 175 VHF Antenna DAI Part# CI175 High strength antenna designed as an improved direct replacement for the standard Cessna 3-hole mounting configuration. The CI 175 has been re-tested and upgraded to the new RTCA DO-160D environmental requirements and offers the 118 to 137 MHz frequency associated with DO-186A MOPS. |
|
| CI 177-13 - Comant CI 177-13 FM/2 Meter Extended Band Antenna DAI Part# CI177-13 Wider band version of the CI 177 with 2.5:1 VSWR or better over a frequency band of 138 to 174 MHz. Improved bandwidth provides greater flexibility by optimizing features of some of the newer FM transceivers. Features a molded base with popular 3-hole mounting. Radiating element is enclosed in a high strength, tapered glass laminate housing. |
|
| CI 177-20 - Comant CI 177-20 UHF Radiotelephone Antenna DAI Part# CI177-20 A rugged monopole antenna particularly well-suited to the harsh environments experienced on the underside of an aircraft. Features standard 4-hole mounting, die-cast metal base and radiator encased in glass laminate housing. |
|
| CI 177-3 - Comant CI 177-3 FM/2 Meter Antenna DAI Part# CI177-3 Designed for use over the public service FM frequency band. Features the popular standard 3-hole mounting with the radiating element enclosed in a high strength tapered glass laminate housing. |
|
| CI 177-4 - Comant CI 177-4 Data Link Antenna DAI Part# CI177-4 The CI 177-4 is specifically designed for use with Weather/Data or WX systems, bringing e-mail and weather data to the cockpit. The CI 177-4 links to the ORBCOMM LEO satellite constellation to bring real time weather and e-mail within easy reach of any pilot. This was built for pure electrical performance. Its 1.5:1 VSWR provides the best reception of any airborne antenna of its kind. |
|
| CI 177-1 - Comant CI 177-1 FM/2 Meter Extended Band Antenna DAI Part# CI177-1 Wider band version of the CI 177 over a frequency band of 138 to 174 MHz. Improved bandwidth provides greater flexibility by optimizing features of some of the newer FM transceivers. Features a molded base with popular 4-hole mounting. Radiating element is enclosed in a high strength, tapered glass laminate housing. | CI 177 - Comant CI 177 FM/2 Meter Antenna DAI Part# CI177 Designed for use over the public service FM frequency band. Features the popular standard 4 hole mounting with the radiating element enclosed in a high strength tapered glass laminate housing. |
|
| CI 193 - Comant CI 193 Glide Slope Antenna DAI Part# CI193 Half wave dipole designed for interior mounting. Integral ferrite balun can result in improved performance when propeller modulation is a problem. |
|
| CI 196 - Comant CI 196 VHF Antenna DAI Part# CI196 Identical to the CI 119. Matches the styling and mounting configuration of the late model Mooney 201/231/252 aircraft series starting in 1978. The CI 196 has been re-tested and upgraded to the new RTCA DO-160D environmental requirements and offers the 118 to 137 MHz frequency associated with DO-186A MOPS. |
|
| CI 200 - Comant CI 200 UHF Radiotelephone Antenna DAI Part# CI200 Rugged monopole antenna particularly well-suited to the harsh environments experienced on the underside of an aircraft. Features a very compact 3-hole mounted die-cast aluminum base with the radiator encased in a glass laminate housing. |
|
| CI 205-3 - Comant CI 205-3 VOR/GS Antenna DAI Part# CI205-3 VOR/Glide Slope High Performance Navigation Antenna Set is designed for mounting on the aircraft vertical stabilizer or helicopter tail boom. Features low weight/drag, tubular structure to minimize helicopter rotor "down wash" forces, wide band/high efficiency electrical performance and DC grounding for lightning protection. Set includes a pair (2) of "towel bar" sensor elements each with single B... |
|
| CI 211-16 - Comant CI 211-16 VHF Extended Band Antenna DAI Part# CI211-16 Intended for installation on long-range executive jet and turbo-prop aircraft capable of operating in Europe, Asia and South America where VHF communication is available over a much wider band. Only 8.25" high, yet provides good performance without the added drag of taller blade communication antennas. The CI 211-16 is identical to the CI 211-1 except it also includes one internal mounting hole fo... | CI 211-1 - Comant CI 211-1 VHF Extended Band Antenna DAI Part# CI211-1 Intended for installation on long-range executive jet and turbo-prop aircraft capable of operating in Europe, Asia and South America where VHF communication is available over a much wider band. Only 8.5" high, yet provides good performance without the added drag of taller blade communication antennas. Skydrol and rain erosion resistant, the optional CI 211-1-L offers leading edge protection as sho... | CI 211 - Comant CI 211 VHF Antenna DAI Part# CI211 Optimum antenna for high-performance jet aircraft. Only 8.25" high, yet provides good performance without the added drag of a taller blade-type communication antenna. Skydrol and rain erosion resistant. The optional CI 211-L offers leading edge protection as shown in outline drawing. The CI 211 has been re-tested and upgraded to the new RTCA DO-160D environmental requirements and offers the 118 to... |
|
| CI 215 - Comant CI 215 VOR/GS Antenna DAI Part# CI215 "V" Dipole VOR/Glide Slope Antenna with Detachable Elements features two integrally molded mounting legs or "spacers" for increased strength. Radiating elements are laminated with polyester glass material for improved precipitation static protection. Interchangeable with the VOR/GS antenna used on most Cessna single-engine aircraft since 1980 including the Cessna 182 and 210 models. Not approved f... |
|
| CI 222-1 - Comant CI 222-1 FM Receive Antenna DAI Part# CI222-1 Efficient FM radio bent whip antenna is higher performance and moderately higher profile version of the CI 222. Features 4-hole mounting, suitable for either top or bottom airframe installations or fixed wing/rotorcraft. DC grounded. | CI 222 - Comant CI 222 AM/FM Receive Antenna DAI Part# CI222 AM/FM receive antenna offers a unique low profile design using standard 4-hole mounting used on many VHF type antennas. Bent whip configuration is ideally suited for underbelly and helicopter installations. |
|
| CI 248-10 - Comant CI 248-10 COMDAT Data Link Antenna DAI Part# CI248-10 The CI 248-10 is specifically designed for use with Weather/Data or WX systems, bringing e-mail and weather data to the cockpit. The CI 248-10 links to the ORBCOMM LEO satellite constellation to bring real time weather and e-mail within easy reach of any pilot. This was built for pure electrical performance. |
|
| CI 248-5 - Comant CI 248-5 COMDAT VHF Communications Antenna DAI Part# CI248-5 This sleek new design was developed for Cessna's 182 and 182T aircraft. Impressive with its low-drag and good looks, the CI 248-5 has been credited with adding 2 to 3 Knots on certain aircraft. The first totally new look in VHF antennas in decades, the CI 248-5 was tested to some of the most rigorous requirements outlined in RCTA DO-160D. Rated to 350 Knots for most high powered twins, the antenna... |
|
| CI 2480-200 - Comant CI 2480-200 COMDAT VHF/GPS Combination Antenna DAI Part# CI2480-200 All new design shares the popular CI 248 style. Combines both GPS and VHF Com functions in a single footprint. Same 4-hole mounting dimensions as popular VHF antennas. Provides separate connections -- TNC for GPS and BNC for communication. Requires no other accessories for connection to panel-mount or handheld GPS/Comm receiver/transceiver "combos." Features a built-in notch filter for excellent p... | CI 2480-201 - Comant CI 2480-201 COMDAT VHF/GPS Combination Antenna DAI Part# CI2480-201 All new design shares the popular CI 248 style. Combines both GPS and VHF Com functions in a single footprint. Same 4-hole mounting dimensions as popular VHF antennas. Provides separate connections--TNC for GPS and BNC for communication. Requires no other accessories for connection to panel-mount or handheld GPS/Comm receiver/transceiver "combos." Features a built-in notch filter for excellent per... | CI 2480-216 - Comant CI 2480-216 COMDAT Antenna VHF/XM DAI Part# CI2480-216 Comant's multifunction VHF/XM antenna for single engine aircraft. Matches single engine common teardrop footprint. Perfect to add XM weather data to a stand-alone VHF mounted antenna. Our patented VHF harmonic suppression also protects co-located stand-alone GPS antennas, allowing for more antennas in less total area. | CI 2590-200 - Comant CI 2590-200 COMDAT VHF/GPS C190 WAAS Antenna DAI Part# CI2590-200 ComDat VHF/GPS antenna designed specifically to meet the GPS WAAS specifications required by the FAA's C190 TSO. Our patented technology provides 80 dB of VHF harmonic suppression allowing VHF and GPS in one radome without in-line filters. Tested and passed to direct effects lightning environmental testing. Gamma 3 WAAS allows for primary navigation using GPS for all phases of flight including pre... |
|
| CI 2580-200 - Comant CI 2580-200 COMDAT VHF/GPS WAAS Antenna DAI Part# CI2580-200 Comant's newest ComDat VHF/GPS antenna designed specifically to meet the GPS WAAS Gamma 3 specifications required by the Garmin G1000 system. Our patented technology provides 80 dB of VHF harmonic suppression allowing Comant to offer VHF and GPS in one radome without in-line filters. Tested and passed demanding direct effects lightning environmental testing. Gamma 3 WAAS allows for primary n... |
|
| CI 259E - Comant CI 259E VOR/GS Antenna DAI Part# CI259E "V" Dipole VOR/Glide Slope Antenna with Fixed Elements is approved for use on helicopter aircraft. Features an integral ferrite balun and fixed element construction. Mechanically designed to withstand the severe low frequency vibration environment experienced in typical helicopter installations. APPROVED for use on helicopter aircraft. |
|
| CI 268-10 - Comant CI 268-10 COMDAT Data Link Antenna DAI Part# CI268-10 The CI 268-10 offers the best Orbcomm functionality. Weather data on today's larger and faster aircraft is a quick and easy install with this all-new ComDat. This model features a super-tough nickel plated aluminum base plate with integral Nitrile "O" ring for pressurized applications, and a heavy duty radome for demanding installations. The CI 268-10 operates at Orbcomm frequencies, providing w... |
|
| CI 268-5 - Comant CI 268-5 COMDAT VHF Communications Antenna DAI Part# CI268-5 The CI 268-5 uses the same radome as our multi-function ComDat antennnas. After adding a ComDat combination antenna, many owners like to match the look for their other VHF antenna. This is the perfect way to do it! The CI 268-5 features the same super-tough nickel plated aluminum base plate with integral Nitrile 'O' ring for pressurized applications found on all ComDat models. Truly unique, the CI... | CI 268-60 - Comant CI 268-60 COMDAT VHF Communications DAI Part# CI268-60 The CI 268-60 uses the same radome as our multi-function ComDat antennnas. After adding a ComDat combination antenna, many owners like to match the look for their other VHF antenna. This is the answer. The CI 268-60 features the same super-tough nickel plated aluminum base plate with integral Nitrile 'O' ring for pressurized applications. What's more, the CI 268-60 shares the same footprint and... |
|
| CI 2680-100 - Comant CI 2680-100 COMDAT GPS/Orbcomm Antenna DAI Part# CI2680-100 The CI 2680-100 extends the lineage that began with the CI 2480 Series ComDat. This model features super tough construction for today's bigger and higher speed aircraft. The antenna combines two functions into one. With two connectors on the base plate, GPS functions on TNC, and BNC is used for Orbcomm. This popular combination offers the best Orbcomm functionality for weather data in the cockpi... | CI 2680-200 - Comant CI 2680-200 COMDAT GPS/VHF Antenna DAI Part# CI2680-200 Combining GPS and VHF is where it all began for the popular ComDat product line. Now, ComDats feature super tough construction for today's bigger and higher speed aircraft. Plus, integral Nitrile 'O' ring and nickel plated aluminum base plates make these new models easier to install on pressurized aircraft. The CI 2680-200 combines two functions into one. With two connectors on the base plate, G... | CI 2680-205 - Comant CI 2680-205 COMDAT WSI-WX/VHF Antenna DAI Part# CI2680-205 WSI and Comant have teamed to provide excellent weather data equipment. By combining standard features like GPS and VHF, WSI users will find it easy to add a WSI System because the ComDat antenna is TSO'd, simplifying the installation process. This model encompasses what the ComDat concept is all about. Installers will save time and money by installing fewer antennas. Pilots will appreciate the ... | CI 2680-216 - Comant CI 2680-216 COMDAT SAT-ENT/VHF Antenna DAI Part# CI2680-216 When adding a Satellite Radio or Weather Data system, two issues arise; The need to add another antenna, and, the antenna can't hold TSO. The answer? Replace the existing VHF Comm with a combined VHF/SAT-ENT ComDat. The SAT-ENT function allows two different applications. It can be connected to popular Satellite Radio systems for music enjoyment. Or, connect it to popular Satellite Weather Data sys... |
|
| CI 271 - Comant CI 271 UHF Radiotelephone Antenna DAI Part# CI271 Stub antenna designed to withstand the harsh environments associated with the underside of an aircraft. Antenna radiator is mechanically captivated and is sealed against leakage. All exposed metal surfaces are nickel-plated for corrosion resistance and long service. CI 271 mounts through single 0.600". BNC connector is standard. See Order Options for connector choices. |
|
| CI 2728-410 - Comant CI 2728-410 COMDAT VHF/GPS WAAS/XM Antenna DAI Part# CI2728-410 Multi-function antenna providing VHF/GPS/XM Weather in a single antenna. Our patented technology provides 80 dB of VHF harmonic suppression allowing Comant to offer VHF and GPS in one radome without in-line fi lters. Furthermore, this antenna provides XM weather capability for excellent cockpit awareness. The GPS antenna is compliant to specifications required for Gamma 3 primary GPS navigation ... |
|
| CI 273 - Comant CI 273 UHF Radiotelephone DAI Part# CI273 Identical to CI 271 except its electrical performance is specified over the frequency range of 403-512 MHz in various band segments with VSWR limits shown. Stub antenna designed to withstand the harsh environments associated with the underside of an aircraft. Antenna radiator is mechaniclly captivated and is sealed against leakage. All exposed metal surfaces are nickel-plated for corrosion resista... |
|
| CI 275-2 - Comant CI 275-2 UHF Antenna - Radiotelelphone DAI Part# CI275-2 Wide band UHF antenna designed for highperformance aircraft over the full frequency range of 406-512 MHz. Low profile, bladetype antenna is encased in a low drag, low weight molded body to ensure high reliablility. The CI 275-2 comes standard with a TNC connector. | CI 275-5 - Comant CI 275-5 UHF Antenna - Radiotelelphone DAI Part# CI275-5 Wide band UHF antenna designed for highperformance aircraft over the full frequency range of 406-512 MHz. Low profile, bladetype antenna is encased in a low drag, low weight molded body to ensure high reliablility. The CI 275-5 comes standard with a N connector. | CI 275 - Comant CI 275 UHF Radiotelephone Antenna DAI Part# CI275 Wide band UHF antenna designed for high-performance aircraft over the full frequency range of 406-512 MHz. Low profile, blade-type antenna is encased in a low drag, low weight molded body to ensure high reliability. The CI 275 comes standard with BNC connector. Other connectors available. See order options chart. |
|
| CI 285 - Comant CI 285 UHF Radiotelephone Antenna DAI Part# CI285 UHF blade antenna design for high performance aircraft over the full frequency range of 400-960 MHz. Low profile, low drag, light weight antenna is packaged in a molded body and metal mounting base to ensure stable performance in tough environmental conditions. Features vertically polarized/omnidirectional pattern, extremely wide band/high efficient electrical performance. DC grounding for lightni... |
|
| CI 291 - Comant CI 291 VHF Antenna DAI Part# CI291 Weighs only 0.5 pounds. Features high strength fiberglass "stick" radiator and die-cast, 3-hole mounted aluminum base. Virtually identical in appearance to many Cessna communication antennas and most LORAN antennas. The CI 291 has been re-tested and upgraded to the new RTCA DO-160D environmental requirements and offers the 118 to 137 MHz frequency associated with DO-186A MOPS. |
|
| CI 292-1 - Comant CI 292-1 VHF Antenna DAI Part# CI292-1 Designed specifically for top mounting on an aircraft. Provides excellent omnidirectional pattern coverage for all VHF aircraft communications. It is equivalent to the CI 291 but features a straight tapered stainless steel radiator. The CI 292-1 has been re-tested and upgraded to the new RTCA DO-160D environmental requirements and offers the 118 to 137 MHz frequency associated with DO-186A MOPS. ... |
|
| CI 292-2 - Comant CI 292-2 VHF Antenna DAI Part# CI292-2 Identical to the CI 292-1 except that it provides a stainless steel bent-whip radiator which makes it ideal for helicopters and bottom mounting underneath fixed wing aircraft. The CI 292-2 has been re-tested and upgraded to the new RTCA DO-160D environmental requirements and offers the 118 to 137 MHz frequency associated with DO-186A MOPS. |
|
| CI 292-3 - Comant CI 292-3 FM/2 Meter Extended Band Antenna DAI Part# CI292-3 Designed to provide 2.5:1 VSWR or better over a bandwidth of 138 to 174 MHz. Features a high-strength die-cast 3-hole aluminum base. Radiating element is a bent-whip tapered stainless steel rod suitable for bottom mounting. The CI 292-3 has been re-tested and upgraded to the new RTCA DO-160D environmental requirements. |
|
| CI 292-4 - Comant CI 292-4 FM/2 Meter Extended Band Antenna DAI Part# CI292-4 Wider band covers popular VHF and FM frequencies. Designed to provide 2.5:1 VSWR or better over a bandwidth of 138-174 MHz. Features a high-strength die-cast 3-hole aluminum base. Radiating element is a straight tapered stainless steel rod suitable for bottom mounting. Overall height only 14.5 inches with BNC connector as standard. The CI 292-4 has been re-tested and upgraded to the new RTCA DO-16... |
|
| CI 295-200 - Comant CI 295-200 Dual Band - Dual Port Public Service Spectrum DAI Part# CI295-200 This single antenna offers frequency spectrum coverage for two of the most used Public Service bands by Search and Rescue teams around the world. Dual ports provide maximum effectiveness and flexibility, allowing the user connectivity to any radio set required for the mission. Helicopter rated for some of the toughest vibration environments, Comant's CI 295 Dual Band / Dual Port antenna saves in... | CI 295-250 - Comant CI 295-250 Dual Band - Dual Port Public Service Spectrum DAI Part# CI295-250 | CI 295-300 - Comant CI 295-300 Tri-Band Single Port Public Service Spectrum Antenna DAI Part# CI295-300 The Tri-Band Single Port airborne SAR antenna is specifically designed to work within the public service spectrum and with radios operating within Motorola's APX architechture. The CI 295-300 SAR antenna operates within P25 standards for maximum effectiveness and connectivity. Helicopter rated for some of the toughest vibration environments, Cobham's single port saves time and space during inst... |
|
| CI295-300-4 - Comant CI 295-300-4 Tri-Band Single Port Public Service Spectrum Antenna DAI Part# CI295-300-4 The Tri-Band Single Port airborne SAR antenna is specifically designed to work within the public service spectrum and with radios operating within Motorola's APX architechture. The CI 295-300 SAR antenna operates within P25 standards for maximum effectiveness and connectivity. Helicopter rated for some of the toughest vibration environments, Cobham's single port saves time and space during inst... |
|
| CI 305 - Comant CI 305 DME/Transponder Antenna DAI Part# CI305 Miniature high speed DME/transponder, one of the smallest DME/transponder antennas available from Comant. Less than 2.75" high featuring a very low-drag frontal profile. Strong, lightweight and easy to mount using four external mounting holes in the base. |
|
| CI 306 - Comant CI 306 UHF Radiotelephone Antenna DAI Part# CI306 Stub-type antenna tuned for the 800-870 MHz radio telephone band. Intended for use on low-flying aircraft and helicopters. CI 306 available with BNC connector and mounts through a single 0.600" diameter hole. CI 306-5 available with a type N connector in which a mounting hole diameter of 0.800" is required. See Order Options for connector choices. |
|
| CI 310-20 - Comant CI 310-20 UHF Antenna - Radiotelelphone DAI Part# CI310-20 L Band / UHF blade antenna designed for high performance aircraft. Low profile, light weight antenna and is packaged in a molded body with metal mounting base to ensure stable environmental performance and resistance to vibration, rain erosion and cleaning solvents. Features vertical/omnidirectional pattern, wide band/high efficiency electrical performance and DC grounding for lightning protection... | CI 310-22 - Comant CI 310-22 UHF Antenna - Radiotelelphone DAI Part# CI310-22 | CI 310 - Comant CI 310 UHF Radiotelephone Antenna DAI Part# CI310 L Band/UHF blade antenna designed for high performance aircraft. Low profile, light weight antenna and is packaged in a molded body with metal mounting base to ensure stable environmental performance and resistance to vibration, rain erosion and cleaning solvents. Features vertical/omnidirectional pattern, wide band/high efficiency electrical performance and DC grounding for lightning protection. ... |
|
| CI 401-220 - Comant CI 401-220 COMDAT GPS Antenna DAI Part# CI401-220 Completely redesigned 401 Series ARINC footprints GPS. This model contains an all-new, highly stable amplifier that offers great performance. Gain performance at 26.5 to 31.5 dB provides excellent Satcom rejection at 40 dB minimum. Plus, this antenna presents very low noise levels at 3.8 dB maximum. The new design features a nickel plated aluminum base plate with an integral 'O' ring for sealing... | CI 401-221 - Comant CI 401-221 COMDAT GPS Antenna DAI Part# CI401-221 Comant's ComDat stand-alone GPS antenna with TNC connector. Matches the standard ARINC footprint found on many twins and business jets. Meets RTCA DO 160-D operating standards including direct effects lightning. Designed to operate with Garmin 17.0 dB gain panel mount GPS receivers. Not compatible with most hand held GPS receiver units. |
|
| CI 401-460 - Comant CI 401-460 COMDAT Satellite Radio/GPS Antenna DAI Part# CI401-460 The CI 401-460 is set apart from other antennas because, in addition to GPS, the antenna provides popular Satellite Radio and Weather Data signal capability. Now installers can quickly place this TSO'd antenna on limited space areas. What's more, installers can provide satellite entertainment and/or weather data systems for their customers without adding another antenna. The newly redesigned 401... | CI 401-490 - Comant CI 401-490 Iridium ARINC Antenna DAI Part# CI401-490 Iridium ARINC Antenna Narrow-band 1616.0 MHz to 1626.5 MHz coverage Aviation-standard ARINC 743 "bar-of-soap" footprint RTCA DO-160 G Environmental tested FAA C159a satellite communication TSO |
|
| CI 401 - Comant CI 401 GPS Antenna Active GPS antenna designed for airborne applications for aircraft up to 600 knots. Certified to TSO C-129a, complies to ARINC 743 specifications, and DO-208 Minimum Operation Performance requirements. All 401 Series antennas offer DC grounding and have passed rigorous Lightning Direct Effects testing as prescribed in DO-160C. Available in many standard formats as listed. Additional designs with v... |
|
| CI 408-20 - Comant CI 408-20 ComDat Antenna - GPS DAI Part# CI408-20 Active GPS antenna designed for airborne applications with aircraft speeds up to 600 KTAS. Round footprint allows for drop-in replacement for many popular GPS applications. Meets RTCA DO 160-D operating standards including direct effects lightning. |
|
| CI 419-200 - Comant CI 419-200 COMDAT WAAS GPS Antenna DAI Part# CI419-200 Comant's first FAA TSO'd GPS antenna qualified under new, stringent C190 WAAS requirements. Using the popular ARINC 743 footprint, this WAAS GPS will operate with any DO-301 qualified WAAS GPS system providing full Gamma 2 & 3 and LPV capabilities. Environmentally tested under RTCA DO-160E standards, the CI 429-200 offers an extensive test pedigree that will meet many GPS system and aircraft req... | CI 420-10 - Comant CI 420-10 COMDAT Antenna - XM DAI Part# CI420-10 Comant's ComDat XM Weather antenna designed for Garmin GDL 69/69A receivers and Heads Up Technologies (HUT) receivers with short coaxial cable runs. Features robust TNC female connector. Conforms to the popular teardrop footprint standard on many general aviation aircraft and business jets. | CI 420-16 - Comant CI 420-16 COMDAT Antenna - XM DAI Part# CI420-16 Comant's ComDat XM Weather antenna designed for Heads Up Technologies (HUT) receivers with longer coaxial cable runs . Features robust TNC female connector. Conforms to the popular teardrop footprint standard on many general aviation aircraft and business jets. | CI 420-1 - Comant CI 420-1 COMDAT Antenna - XM DAI Part# CI420-1 Comant's ComDat XM Weather antenna with SMA connector. Designed to operate with popular Heads Up XM Weather Data Systems. Conforms to the popular teardrop footprint, standard on many general aviation aircraft and business jets. | CI 420-220 - Comant CI 420-220 COMDAT GPS/XM Antenna DAI Part# CI420-220 Comant's ComDat stand-alone GPS antenna with TNC connector. Matches the popular teardrop footprint found on many general aviation aircraft and business jets. Meets RTCA DO 160D operating standards including direct effects lightning. Designed to operate with 26.5 dB panel mount GPS receivers. Certified FAA TSO-C144 for GPS and GPS WAAS Class Gamma 1 equipment. Not compliant for GPS WAAS Class G... | CI 420-221 - Comant CI 420-221 COMDAT GPS Antenna DAI Part# CI420-221 Comant's ComDat stand-alone GPS antenna with TNC connector. Matches the popular teardrop footprint found on many general aviation aircraft and business jets. Meets RTCA DO 160D operating standards including direct effects lightning. Designed to operate with 17.0 dB panel mount GPS receivers. Not compatible with most portable GPS receiver systems. | CI 420-230 - Comant CI 420-230 COMDAT GPS Antenna DAI Part# CI420-230 |
|
| CI 428-200 - Comant CI 428-200 COMDAT GPS WAAS Antenna DAI Part# CI428-200 Comant's newest ComDat GPS WAAS antenna designed specifically to meet the GPS WAAS Gamma 3 specificatons required by the Garmin G1000 system. Matches the standard ARINC footprint found on many twins and business jets. Meets RTCA DO 160D operating standards including direct effects lightning. Gamma 3 WAAS allows for primary navigation using GPS for all phases of flight including precision LPV... | CI 428-410 - Comant CI 428-410 COMDAT GPS WAAS/XM Antenna DAI Part# CI428-410 Comant's newest ComDat GPS WAAS/XM antenna designed specifically to meet the GPS WAAS Gamma 3 specificatons required by the Garmin G1000 system. Enables primary navigation using GPS WAAS, including terminal navigation and approach to landing. XM Weather antenna is designed for low gain systems such as the Garmin GDL-69/69A or Heads Up systems with shorter coax runs. Conforms to the popular A... |
|
| CI 429-200 - Comant CI 429-200 COMDAT WAAS GPS Antenna DAI Part# CI429-200 Comant's first FAA TSO'd GPS antenna qualified under new, stringent C190 WAAS requirements. Using the popular ARINC 743 footprint, this WAAS GPS will operate with any DO-301 qualified WAAS GPS system providing full Gamma 2 & 3 and LPV capabilities. Environmentally tested under RTCA DO-160E standards, the CI 429-200 offers an extensive test pedigree that will meet many GPS system and aircraft req... |
|
| CI 429-410 - Comant CI 429-410 COMDAT WAAS GPS/XM Antenna DAI Part# CI429-410 Comant has developed the first and only FAA TSO'd GPS/XM antenna qualified under new, stringent C190 WAAS requirements. Using the popular ARINC 743 footprint, this WAAS GPS will operate with any DO-301 qualified WAAS GPS system providing full Gamma 2 & 3 and LPV capabilities. The XM portion of the antenna will operate with popular panel mounted systems from Garmin and Heads Up. Manufactured wi... |
|
| CI 490-490 - Comant CI 490-490 Single Channel Iridium SATCOM antenna DAI Part# CI490-490 Comant has developed the first Iridium band antenna that meets the FAA's tough, new TSO standard C159a. Newly designed narrow band patches provide unmatched efficiency. The ComDat CI 490-490 is a high performance communications antenna specifically designed for Iridium systems, and features our standard round-format footprint and mounting. Through a constellation of 66 low-earth orbiting (LEO)... |
|
| CI 502 - Comant CI 502 Coupler VOR DAI Part# CI502 Dual VOR coupler allows the simultaneous use of two VOR receivers from one VOR antenna. Compact design makes installation easy. |
|
| CI 503 - Comant CI 503 Coupler Glide Slope DAI Part# CI503 Dual glide slope coupler designed to allow the operation of two glide slope receivers from one glide slope antenna. Compact design makes installation easy. |
|
| CI 505 - Comant CI 505 Diplexer Dual VOR Glide Slope DAI Part# CI505 Dual VOR coupler/single glide slope diplexer allows the operation of two VOR receivers and one glide slope receiver from one VOR/glide slope antenna. Compact design makes installation easy. Also available with TNC connectors. |
|
| CI 507 - Comant CI 507 Diplexer VOR/Glide Slope DAI Part# CI507 Single VOR/single glide slope diplexer allows the operation of one VOR and one glide slope receiver from one VOR/glide slope antenna. Compact design makes installation easy. |
|
| CI 509 - Comant CI 509 Coupler Marker Beacon DAI Part# CI509 Single VOR/single glide slope diplexer allows the operation of one VOR and one glide slope receiver from one VOR/glide slope antenna. Compact design makes installation easy. |
|
| CI 5120 - Comant CI 5120 Splitter Dual VOR/LOC/GS DAI Part# CI5120 Designed for use with Garmin GNS 580 and similar systems. The CI 5120 splits single coax antenna input into equally proportioned VOR/ LOC/GS outputs, allowing you to run two single input receivers off of one antenna. |
|
|
News/Announcements - June 1, 2020
- 2020 Comant Sales Event
- 2020 Comant Sales Event
View Details |
|
|
|
|